Ex Canopy Gas Station Highbay LED Light - IECEx ATEX Hazardous Area Zone 2
Ex Canopy Gas Station Highbay LED Light - IECEx ATEX Hazardous Area Zone 2
Couldn't load pickup availability
The CPA-Series Hazardous Area Canopy Gas Station Highbay LED Light, sets the stand in Ex rated explosion-proof lighting. Engineered to endure and perform in the relentless challenges of the industrial environments with moisture, dirt, dust, corrosion, and vibration.
Harnessing equipment protection levels of Ex ec / op Increased Safety and Optical Radiation technology, these LED lights are perfectly suited for the most challenging harsh atmospheric conditions found in industries such as gas stations, oil and gas, marine, petrochemical, chemical, petroleum, spray booths, and breweries. Covered by the IECEx and ATEX certification, brings a compliant solution to hazardous areas.
FEATURES
- Low Maintenance Design
- High LED Efficiency
- Thermal Heat Dissipation
- Ultra Wide Lens Angle
Collapsible content
Technical Datasheet
Shipping
Manufacturing lead time is dependant on quantity ordered. This is excluding the delivery lead time which is estimated at checkout.
We aim to process and get your delivery with you as quick as possible.
Please contact us to retrieve the estimate lead times for your order.
Guarantee
We aim to provide you with the best quality products, if for an unfortunate product defect we have a 14 day money back return guarantee.
Warranty
• 1 year warranty from the date of purchase.
• Invoice or shipment bill is required to claim the warranty.
• The warranty policy only requires manufacturer to repair the defective product or send substitute for replacement.
• Installation labour, electricity cost and other related cost will not be covered by the manufacturer warranty policy.
• Warranty doesn't cover the defect caused by inappropriate use, especially if directions of the instructions for use are not observed, normal abrasion as well as failures which affect the value or use of the product insignificantly.
Please see our returns policy for more information.
-
Hazardous Area Certified
Certification
- IECEx CQM 20.0002X
Zone EPL
IECEx
- Ex ec op is IIC T6/T5/T4/T3 Gc
- Ex op is tb IIIC T80°C/T95°C/T130°C/T195°C Db
The relationship of ambient temperature, temperature class and main electrical parameters is specified in "General
product information". -
Electrical
Lumens Per Watt:
- 130lm/W
Lumen Output:
- 60W=7,800lm 150W=19,500lm
Beam Angle:
- 120°
Input Voltage
- 100-277VAC, 50/60Hz / 12VDC / 36VDC
-
Construction
Housing Material
- Aluminium alloy ADC12
Diffuser
- Toughened glass
Protection
- IP66
Mounting
- Pole, Rope Pendant
Case Studies
-
Propane Transportation Facility
Propane transportation facility lighting design made by our lighting engineers. This install we used *3 40W Ex rated Zone 1 LED Jelly Jar lights, with mounted height of 4m. The propane transport area, measuring 2.4x12m achieved an average illumination of 12.9 foot-candles (fc).
-
Chemical Plant
Chemical plant lighting photometric design made by our lighting engineers. This install we used *4 150W Ex rated Zone 1 LED highbay spot lights, with mounted height of 4.5m. The sub level grading height was 3m, and achieved an average illumination of 70fc while the main level ceiling was 4.2m with an illumination average of 34.5 fc.
-
Paint Booth
Spray paint booth lighting photometric design made by our lighting engineers. This install we used *9 60W Ex rated Zone 1 LED Linear Lights, used on a 12x2.4m paint booth with 2.7m ceilings. The fixtures were mounted on the wall and provided a maximum of 290 foot candles with a uniformity of 1.22-3.96.
Lighting Design
-
Illumination Mapping
2D and 3D mapping helps better placement of lighting, as a result of the colour view from the pseudo view of coverage. Resulting in cost effective solution to knowing exactly where and how many lights are needed.
-
3D Site Modelling
A professional addition to provide a detailed layout of the near real life site that includes all the construction variable on site. Visually seeing how object are effecting blind spots.
-
2D Light Positioning
Using your site drawing plans, we can plot the lights and draw a coverage area via the spread of lux levels, from the lights.
-
Pre & Post After Sales Support
After Sales Support
We offer after sales support on all our products including
- Installation
- Configuration
- Maintenance
- Repair
- Calibration
-
Need a custom solution?
- CAD drawing.
- P&ID.
- Component selection.
- Bill of materials.
- Factory Acceptance Testing (FAT)
- Professional packaging and delivery.
Contact form
Australian Operated and Owned.
Our Core Values
-
UNPARALLELED SUCCESS
We embrace every challenge as a team with our expertise, and have a proven track record of success when we collaborate.
-
WORK SMARTER NOT HARDER
In order to do great work, we need knowledgeable, well-trained individuals, combined with automation. We are dedicated to not only providing our team with top-notch training, but also world-class equipment to ensure we’re stay at the cutting edge of the industry.
-
TAKE PRIDE
Since the beginning, we have always believed in the quality and longevity of the products we sell and service we provide, and are proud to offer our expertise to all industries.
